| |
Sele-speed system oil level must be checked with the car level and
the engine cold.
To check the level, proceed as follows:
• Turn the ignition key to MAR.
• Detach the bleeder pipe and remove the cap, and check that the
level is at the MAX level on the dip stick that is integral with the
cap.
• If the oil is below the MAX level, top up until the correct level
is reached.
• After screwing the cap back on, insert the bleeder pipe fully onto
the cap tip and turn the ignition key to STOP.
Use only "Tutela CS Speed" oil for topping up |
