|
1. Wait for the electric pump to switch off (The pump activates when
the door on the driver's side is opened and automatically switches
off after a maximum time of 30 seconds).
2. Set the ignition key on MAR.
3. Make several gear shifts with the engine off so as to activate
the electric pump.
4. Immediately after the electric pump switches off, check the
hydraulic unit oil level with the dip-stick under the cap of the
tank.
5. If the oil level is under the Max marking, top up ; if it is
over, bring it down to Max level.
NOTE:
It is a good practice to make a note of the amount of oil used
for the topping up.
|
